The installation of a heater isn't a DIY undertaking, particularly when it comes to gas lines. An error could cause dangerous leaks or, even more dangerously fire.
Begin by shutting off the power supply to the heater on the panel for breaker and then draining the tank. Set the unit on the blocks and check that the unit is in alignment with water and gas lines.
Air Conditioner
A cooling system for air conditioning consists comprising an indoor unit (the air handler) and an outdoor unit, which comprise pipes that contain refrigerant. Outdoor units are usually mounted in the outdoors on pads. There's a trunking from the indoor unit all the way to an outdoor one. Installation of both outdoor and indoor units usually requires a minimum of two hours.
We'll run a manual J load calculation during your estimate to help determine what size of an air conditioner which is the best for your needs. We will be able to determine how much heat is lost and absorbed by your home during summer. The information we gather will allow us to decide on the ideal unit for your needs.
We will then install the window in order to accommodate the unit. This is done by opening the window, sliding the sash up and removing any screens that may be in place. The sill beneath the window will be checked for debris and dirt that could interfere with the installation of the appliance.
Furnace
The furnace can also be referred to as heating or boiler. It's a part within the HVAC systems (heating, ventilation, and air cooling) within your home. The furnace heats up cold air and then distributes it through your home via pipes.
The furnace employs a combustion procedure that warms the air in your house using gas or oil. This is a complex process that requires an HVAC professional who is familiar working with various types of fuel such as natural gas and heating oil.
A HVAC contractor with the proper qualifications will assist you to select the right furnace for your home depending on the budget you have set and aspects like the size of your home. They will also assist you to select a reliable furnace in accordance with your budget.
The HVAC contractor could need to upgrade or modify your house during installation, depending on which furnace you choose. It could mean modifying your HVAC the ductwork, or even installing new gas pipes. It can raise the overall cost of the project.
The team of installers must carry out various safety tests prior to commencing work. The installation crew should shut off all breakers that supply electricity to the furnace and check that fuel and gas lines are working properly and properly sealed. They'll also check that there's sufficient space to allow their work to be done safely. Installers should demonstrate how you can replace the furnace filter, as well as describe any modifications made to your thermostat and heat set-ups.
Air Handler
Air handlers play an integral part of your heating, cooling, and ventilation system. Though they can look similar to furnaces, they actually do more than produce hot or cold air. Air handlers make use of ductwork and your heater or air conditioners to move the conditioned air in your home. This system will create an efficient and comfortable home.
Although some people confuse the two terms blower and handler, it's important to recognize the distinct features between the two parts from HVAC devices. The blower, which is component of an air handler, additionally has dampers and mixing rooms to distribute humidified indoor air.
The air handler is able to be put in just about any place within your home, but typically, it is placed near the ductwork for the most efficient utilization of the duct space. You'll typically find them in the attic and crawl space as well as the in the utility room, though they can be installed centrally in the event you choose to install a ductless system (also known as a mini-split).
You'll need one if you replace your baseboard heater with air cooling. Similar is the case if your conversion is between electric and gas or if you're making a home that isn't connected to natural gas lines.
The air handler is fitted with a blower as well as evaporator coils, thermostat and blower to circulate the air. The units are one-speed or variable in addition to an electric heater package that comes with heat strips to aid in keeping your home environment cool. Air handlers range in price from $2900 to $5800 with installation. Our NATE-certified technicians will help in selecting the ideal new device and then match it to your existing heater or air conditioner to ensure maximum efficiency.
Ductwork
The ductwork system is an array of pipes used to circulate an air conditioner in your home. The plenum forms the branch line that connects the furnace that connects to your house, with branch lines going to every room. The ducts are hidden in ceilings or walls, but need to be visible for maintenance.
It's essential to have the correct skills when it comes to installing Ductwork. Professional sheet metal installers will do this correctly from the beginning and even a DIYer could make mistakes in the event of a lack of care.
The rigid ducts are made from galvanized steel, tin, fiberglass, or sheet metal. They are usually used for heating and cooling to move conditioned air up from the plenum through an attic or crawlspace, or basement ceiling, through spaces that are occupied below, and from vents. They can be either uninsulated or even insulated. They can be constructed with the option of a double or single wall construction.
Square or rectangular ducts are generally made in an specialized metal workshop, whereas circular and irregularly shaped types are usually made in the field. Typically, rigid ducts have an internal perforated liner and then, a layer of faced fiberglass blankets in a double or a single wall and finally a protective outer wrapping.
Flex ducts, however, is made up of flexible plastic that is bonded to a metal wire coil, and is simply installed in a small duration. The duct is composed out of different materials and usually covered with vinyl.
Thermostat
A thermostat is the control central for HVAC and cooling systems. The thermostat senses whether the temperature in the room is either too low or high and informs your furnace to turn on and off the heating system in order to ensure a comfortable home. It is important that your thermostat be installed within an area of your house that is well insulated and free of curtains, furniture or any other things that may affect its ability to feel airflow. The thermostat must be placed at a height of 52- 60" over the ground.
If you're planning to install an adjustable thermostat, make certain that the wiring inside your home supports the thermostat. There will likely be more than two wires of low voltage connected to the thermostat, which include a white and black one to turn the furnace off and on and another wire that powers the thermostat. Make sure you follow the directions on the wiring diagram of your thermostat. The wires should be wrapped in masking or painter's tape prior to disconnecting them, to aid in identifying their color and terminal. It is also a good idea to snap a photo of the base plate and wiring connections with your smartphone so that you can reference them later.
Make sure that you turn off the main circuit breakers inside heating installations your home to shut off the power. The faceplate and the base of the thermostat. Remove the screws holding the backplate. Remove it off the wall. Using the photo that you snapped or the wiring diagram you received with the new thermostat, apply new tape to each of the wires from the old thermostat and join them with the appropriate terminals on the new thermostat's base. If you've already labeled your old wires, this step is easy and quick.